Used Equipment
2017 Doosan G30E-5
Serial Number: FGA09-1790-03789
Engine Hours: 1186
Specifications
| Brakes | Wet Disc |
| Power Mode | Gasoline |
| Torque @ RPM | 116.0 ft-lb |
| Engine | G420FE |
| Horsepower | 54.0 hp |
| Engine Manufacturer | Mitsubishi |
| Cylinders/Displacement | 4/143.3 |
| Relief Pressure Hyd | 3132.0 |
| Lowered Overall Height | 85.2 in |
| Standard Mast: Free Lift | 6.0 in |
| Maximum Fork Height | 127.2 in |
| Mast | 3-Stage |
| Steering | Hydrostatic |
| Transmission | Powershift |
| Number of Speeds | 1/1 |
| Fork Size (T x W x L) | 1.8 X 4.9 X 41 in |
| Front Overhang | 19.1 in |
| Height to Top Overhead Guard | 86.0 in |
| Maximum Fork Spread | 41.1 in |
| Minimum Aisle Right Ang Stack | 112.2 in |
| Overall Length | 106.3 in |
| Overall Width | 47.1 in |
| Tread (Front/Rear) | 38.7/39.4 |
| Wheelbase | 66.9 in |
| Center of Wheelbase | 5.6 in |
| Steer Tire Size | 6.50 x 10-10PR |
| Drive Tire Size | 28 x 9 x 15-12PR |
| Lift Capacity | 6000.0 lbs |
| Maximum Drawbar Pull | 3273.0 lbs |
| Load Center | 24.0 in |
| Travel Speed Loaded | 11.2 mph |
| Gradeability Loaded @ 1 mph | 21.0 percent |
| Max Fork Height Rated Capacity | 169.0 in |
Financing Options
We offer best in class financing for new and used equipment. Not sure what you may qualify for, reach out to our financing team today to get pre-approved at the lowest rate possible.
Learn MoreSpecifications and images may vary in accuracy.
Data Powered By EquipmentWatch
Related Equipment
2019 Linde H30T / 393-02
Hours: 7047.5
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
2018 Linde H25 IC Pneumatic Forklift 3-Stage
Hours: 5345.5
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
2020 Linde H30T 1202 Series
Hours: 1587
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in