Used Equipment
2020 Bobcat A770
Serial Number: AT5J12826
Engine Hours: 3092
Specifications
| Bucket Width | 74.0 in |
| Power Mode | Diesel |
| Horsepower | 92.0 hp |
| Fuel Tank Capacity | 27.2 gal |
| Hydraulic Pump Flow (Hi-Flow) | 36.6 gal/min |
| Hydraulic Pump Flow (Standard) | 23.7 gal/min |
| Relief Pressure (Std Flow) | 3500.0 psi |
| Operator Protection | ROPS |
| Number of Speeds | Variable |
| Transmission | Hydrostatic |
| Travel Speed | 7.0 mph |
| Dump Reach @ Full Height | 31.5 in |
| Angle of Departure | 25.1 degrees |
| Bucket Rollback (Full Height) | 98.0 degrees |
| Bucket Rollback (Groundline) | 31.9 degrees |
| Clearance Circle Front (w/Bkt) | 151.5 in |
| Clearance Circle Rear | 133.3 in |
| Dump Angle | 42.0 degrees |
| Dump Height | 104.3 in |
| Ground Clearance | 8.1 in |
| Height to Hinge Pin | 132.0 in |
| Length Less Bucket | 114.3 in |
| Length With Bucket (Dig/Carry) | 141.6 in |
| Maximum Operating Height | 166.6 in |
| Operating Weight | 9460.0 lbs |
| Tread Width | 59.3 in |
| Wheelbase | 48.3 in |
| Width Less Bucket | 75.0 in |
| Height to Top of Cab | 81.3 in |
| Operating Capacity | 3325.0 lbs |
| Tipping Load (SAE) | 6650.0 lbs |
Financing Options
We offer best in class financing for new and used equipment. Not sure what you may qualify for, reach out to our financing team today to get pre-approved at the lowest rate possible.
Learn MoreSpecifications and images may vary in accuracy.
Data Powered By EquipmentWatch
Related Equipment
2013 Bobcat A770 All Wheel Steer Loader
Hours: 2499.0
Horsepower: 92.0 hp
Dump Height: 104.3 in
Horsepower: 92.0 hp
Dump Height: 104.3 in
2019 Caterpillar 272D3
Hours: 3660.0
Horsepower: 95.0 hp
Operating Capacity: 3400.0 lbs
Horsepower: 95.0 hp
Operating Capacity: 3400.0 lbs
2018 Bobcat S650 Skid Steer Loader
Hours: 3293.0
Horsepower: 74.3 hp
Dump Height: 96.3 in
Horsepower: 74.3 hp
Dump Height: 96.3 in